Cold War British and a big cat.

 I can't believe its been nearly a month since I posted anything. My painting mojo did die after finishing the Wars of the Roses figures, but I should have posted something before now. 

So, here I am with another update on my meandering wargaming habit. I have finally painted up my 15mm Cold War British vehicles that were discussed way back in May/June last year. There is still no sign of the former Armies Army models appearing from Scotia-Grendel, so I have bitten the bullet and accepted that I will have to have various sizes of vehicles. So, after slapping some paint about I completed the mix of vehicles I had, adding more tanks and APCs, plus some AT and recce assets.

Team Yankee British Vehicles

All told I did 16 vehicles and a helicopter, more than doubling my British vehicle force.  This lot gives me enough to put on a decent sized game at some point, assuming we are ever allowed to get together again.

Gazelle AH1 scout

One thing I decided I wanted was a Gazelle helicopter as a recce element and annoyance for the Soviets. While it has no armament, it is a good scout and could spot the enemy advance, assuming it doesn't get shot down by a ZSU-23-4 or SA-9. The model is a French HOT Gazelle without the missiles and painted up as British.

Strikers, Fv432s and Chieftains

I needed some more basic elements as well, so 3 extra Chieftains and some additional Fv432s were added. One area I was sorely deficient in was anti-tank guided weapons, so I picked up a box of Spartans and made two up as Fv102 Stikers. These are small and fast, able to hopefully hit and then run before they get spotted and blown to smithereens. They are lovely little kits.

Fv438s

Another anti-tank option is the Fv438, an adaptation of a standard Fv432 APD with a twin Swingfire missile launcher. Nice enough models which at least gives me another option.

Chieftains

I only had a single squadron of 3 Chieftains, so added another. These are big targets that will attract a lot of fire, but they do look nice and pack a big punch.

Scorpions and Spartans

Reconnaissance is very important in Battlegroup games, as it is in reality. So I picked up a box of Scorpion/Scimitars as well. Two were made up as Fv101 Scorpions, with a short 76mm gun. These are lovely little models and will look the part on the table. I also made up a pair of Fv103 Spartan APCs to carry support teams such as Milan or Blowpipe teams.

Scimitars

Finally there is a pair of Fv107 Scimitar light tanks. these are identical to the Scorpions except they have a 30mm cannon instead of the short 76mm gun. 

So, there they are. All I have to do now is paint up a second platoon of British infantry and everything I have for the British will be done. Until I get some more that is, I want some AA support, either a static Rapier or a tracked Rapier system. Maybe a Lynx with TOW missiles too, just to use the gunship token if it ever comes out, maybe an AVRE Centurion too as an option.

Finally I got around to painting this wee beastie.

Warlord King Tiger

I have had this kit sitting on the shelf for about a year now so decided enough was enough, built it and painted it. I don't have any late war Germans so this will probably end up on ebay at some point soon, but it was a pleasant change to do something this big. It's a decent kit and comes with the options of both turret types, I just went with the Henschel turret as that was the most common.

That's the lot for now, stay safe and I'll catch you all later.

New rules, yet another project and problems with Fv432s

Hello again folks, I'm back again with another rambling post.

First thing is to point out that Too Fat Lardies have a new set of rules covering skirmish actions in the Roman period. Infamy, Infamy looks like it will be a lot of fun to play and doesn't require masses of figures like most ancient rules do. Have a look at the videos on YouTube to see what size the typical forces are. I'm looking forward to it arriving and, hopefully, the lift on the Covid rules so I can play it.

This leads to an obvious new project, Romans and Barbarians for this set of rules. I have a few Ancient British troops already, but they are based on 40mm squares and don't really work for a warband skirmish. One problem is that I like to have both sides for games so that I can run games for friends who don't have forces for it. So what to get. I am waiting for the rules to turn up before I decide what to buy, but initial thoughts are Ceasarian Romans and Gallic types. So that's going to take up my money for this year I think. Also this is subject to me being able to see well enough to paint the damn things at some point soon. 

Finally for this ramble it's back to the Cold War project. I was up late as I couldn't sleep again, this can prove to be a bad thing and it was for me on this occasion. In a moment of weakness at 3am I was browsing and came across an online store that had Team Yankee Fv432s and British infantry in stock. A couple of minutes later and I had ordered said Fv432s and infantry. My willpower at 3am is obviously weak. Anyway, they duly arrived and were opened up. The infantry are fine and match up with my existing Armies Army infantry nicely. The Fv432s though are another story. Now, if I had been looking at ordering these at a normal time of day I would have done a search for a comparison of the two, but at 3am this doesn't spring to the front of the queue. Once I had them though I thought they looked a bit small. So I did a search and lo and behold, a review pointing out the size difference is out there. Arse! So the Team Yankee model is smaller than the Armies Army one, noticeably so. Also it doesn't have the option of a peak turret, although it does have the options for a Swingfire armed Fv438. So now I have 5 Fv432's that are smaller than the 5 existing Fv432's I have. I am now going to have to decide if I want to keep them or wait and hope that Scotia Grendel are going to release the Armies Army models at some point. 

Ah well, decisions for another day as I am off to drop presents for one of the grand kids birthday. Adios for now folks, stay safe and keep gaming

The BAOR arrives......well, a small bit of it does anyway

 It brightened up yesterday so I managed to varnish my Cold War British contingent. These are all from Armies Army again and yet again are lovely models with no issues that I have found. I got these last year but the painting mojo for them didn't arrive until recently, so I have finally got around to painting them all up.

First up is the Mechanised Infantry platoon. Three squads of 8 men each with a GPMG and Caarl Gustav led by a 4 man command team with a 2" mortar.  All ferried about in four "mighty" Fv432s. Unlike Team Yankee these are available either with or without the peak turret, I decided on 2 of each just to mix it up a bit.

A closer look at some of the infantry and my attempt at 15mm DPM camo. I am fairly happy with the way they turned out but they are much more work to paint than Russians.

A closer look at the battle taxis, the Fv432. A similar design to the M113, basically a box on tracks, the 432 differed in being steel rather than aluminium and also being decidedly British by having a BV or "Vessel Boiling Electric". Basically it is a hot water system but I guess it wasn't military enough to call it a kettle. Still, +1 morale for having a cuppa in the middle of a firefight?



Now we come to the support options. At the front are a pair of Milan teams, a pair of Blowpipe SAM teams and a tripod GPMG team. I really need another Fv432 to carry the Milan teams about, along with a couple more figures to fill the ranks. Behind them are a Spartan APC for the Blowpipes and a Landrover for......well, I like them! Finally the heavy stuff, a trio of Chieftains ready to slap some T-72s around. I love the look of the Chieftain, it looks like it's going to ruin your day.

A closer look at the Milan teams with the Blowpipes behind them.





The Landrover is a lovely vehicle, I still want one if the boss ever lets me. I added the camo netting in the same way I did for the dutch, but didn't add the flock this time. I am not sure which I prefer yet so these "may" get flocked later. It's dwarfed by the Chieftain though, like most things are I guess.


Finally, for now, we have the Spartan and a Chieftain. The Spartan is a small APC, only able to carry 4 or 5 soldiers, but it's quick. It was used to carry specialist units like SAM teams and recce troops while the bigger Fv432 carried the infantry about. Behind it is the command Chieftain, given away by the open hatch and commander figure.

So that's the lot for now. I still need to add a few things, some Scorpions and/or Scimitars, an Fv438 Swingfire carrier and possibly some more infantry to make an Infantry Combat team. Hmm, not just yet though cos we is skint. Apparently a new microwave and flowers for the garden rank much higher than figures for me. Good job I love her innit. ;-)

Anyway, that's it again. Catch you later.

15mm Cold War

Not content with just painting tribal types, I have also started painting some of the Cold War collection I have been gathering for the last year or so. Last year I picked up a bargain pile of 2nd hand Soviet kit at Firestorm Games table sale. The box I had was fairly packed with vehicles, so I have been painting green like a mad man.  

The box I bought had a mix of 9 T-80, 3 T-72, 3 BTR-80 and 8 BMP-2s. All except the BMP-2s were base coated in a reasonable base colour, so a quick spray and then washes, several drybrushes and such made it job done on them. I also added some aerials. The BMP-2s are a shocking colour, it looks like bronze green or similar and is way too dark, so they are currently sitting in paint stripper in the vain hope that they will be recoverable. Luckily they are metal so won't be hurt by the paint stripping efforts.

Here are the T-80s, 3 with ERA and 6 without. These were a bit battered and bent but all were repairable and look ok now I think.  I believe that these are QRF models, but don't know for sure.





The 3 T-72 models are Zvezda, a bit lacking in details such as the cupola MG but good enough to make a platoon.





The BTR-80s are also Zvezda models, decent enough for the job of carrying a Soviet MR platoon.


I also had a box of Team Yankee BMPs included, so set about with the modelling cement.

So here we have 5 BMP-1s, the original Soviet IFV. Vastly more capable than the M113s and Fv432s used by most of NATO, these really are nice kits. One nice touch is that each sprue contains both the BMP-1 and BMP-2 hulls and turrets, but only one chassis. So out came the thinking cap and a bit of sneaky chopping and gluing resulted in this

Some chopped up plastic bases from various boxes of figures and a 1 cent Euro coin(the ideal size and magnetic) in the chassis, then a couple of magnets glued onto the underside of the hull resulted in removable BMP hulls.

Here are the BMP-2 versions, better armed than the earlier version with an improved missile and a rapid fire 30mm gun instead of the 73mm smoothbore of the BMP-1.


I went in on the pre-order of T-55s from Plastic Soldier Company. I like the kits they make, really good quality and usually with a range of options.  The T-55 box was just great with options to make T-55, T-55A or T-55AM versions.  I went for the AM version, upgraded with extra armour and a laser rangefinder.
So finally the 5 T-55s finish the current force. I am now sat here looking at a small mountain of 15mm Soviet infantry. I have enough for 2 platoons but need some ATGW teams to complete the force. Hopefully I will get a bit of paint on them this weekend, but family duties are calling.